Call 08048979936 93% Response Rate

Send Email

Plate Edge Beveling Machine

Wholesale Trader of a wide range of products which include plate edge beveling machine, automatic plate beveling machine and plate beveling machine.
Plate Edge Beveling Machine
  • Plate Edge Beveling Machine
  • Plate Edge Beveling Machine
  • Plate Edge Beveling Machine

Plate Edge Beveling Machine

Product Price: Rs 14 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Capacity32 mm
Model Name/NumberKBM 18
Automation GradeAutomatic
BrandGullco
Motor2 HP
Min Plate Thickness1/4'' (6.0mm)
Max Plate Thickness1 1/2" (38.1 mm)
Weight340 lbs. (154Kg.) including undercarriage assembly
Bevel Speed120 in. (304.8 cm) per minute

Features:

KBM-18® Plate Edge Bevellers - Portable - Self Propelled

KBM-18® bevellers produce clean machined bevels with no

thermal distortion on mild steel, stainless steel and

aluminum plate from 1/4” (6.0 mm) to 1 1/2” (38.1 mm) thick.

Thinner material can be bevelled… consult factory for details.

The KBM-18® automatically bevels the topside of the plate

reducing time and cost. Savings are further enhanced when

the KBM18U® underside beveller is used in applications

Where both sides of the material require bevelling

Adjustable Undercarriage For Easy Height Adjustment

The KBM-18® can be purchased with an adjustable height,

self-aligning, spring-loaded caster wheel assembly for self propelled bevelling along any length of plate maintaining a

uniform bevel and consistent root face. Undercarriage sold separate.

Angle Bevel Pins Enable

Bevel Angle Adjustment

KBM-18® units are supplied with angle bevel pins for

22 1/2°, 30°, 37 1/2°, 45° and 55° bevels. Pins for other bevel

angles are available upon request.

Operates at 10 feet (3 meters) per minute

Bevel Width: 0.71” (18.00 mm) at standard 30° bevel angle on material with a tensile strength of 64,000 lb/in2 (45 Kg/mm2)

Maximum Bevel Depth: 0.61” (15.6 mm) at standard 30° bevel angle on material with a tensile strength of 64,000 lb/in2 (45 Kg/mm2)

Get Best QuoteRequest A Callback
Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine
  • Automatic Plate Beveling Machine

Automatic Plate Beveling Machine

Product Price: Rs 7.5 Lakh / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Product Details:
Capacity14mm
Model Name/NumberABM-14
Automation GradeAutomatic
Plate Thickness RangeUPTO 50MM
Power3 PHASE
Product CodeABM-14
ABM-14 PLATE AND PIPE BEVELLERABM-14 is a beveling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys.In just one single run the machine can bevel up to 2.6 m/min. (8.5 ft/min.) to a width of 12 mm (1/2’’) in workpieces with tensile strength of Rm ≤ 392 MPa (57,000 psi).Maximum bevel width is 14 mm (9/16’’). Depending on materials two or more runs are needed. Bevel angles incl. 30° (standard) and with optional angle variation devices also 22.5o, 25o, 35o, 37.5o or 45o.The machine can bevel plates from the top and bottom.In the case of the milling tool getting stuck in the material and beveling cannot be continued the direction of rotation of the tool can be reversed to release the machine from the workpiece.There is no need to wear acoustic protection equipment because the noise produced by the machine doesnot exceed 70 dB.
Features & benefits• fast and efficient• bevels both small and large piecesto cover most of the commonapplications for its type• auto feed on large plates with optionaltrolley• beveling of lower edge in invertedposition• standard shearing cutter for machiningcarbon steel• 2 optional shearing cutters dedicatedto stainless/alloyed steel and aluminum• reversible spindle against stuck millingtool• versatile and transportable on its owntrolley• low noise

Voltage3~ 400 V + PE, 50/60 Hz
Power2200 W
Spindle speed9 rpm
Bevel angle range30o
(ß – depending on angle device in use)22.5o, 25o, 35o, 37.5o, 45o (options)
Bevel width (b)up to 14 mm (9/16’’)
Maximum bevel in one single run12 mm (in 40 Kg/ 392 MPa carbon steel)
Minimum plate thickness6 mm (1/4’’)
Maximum plate thickness40 mm (1-9/16’’)
Minimum plate width55 mm (2-3/16’’)
Bevel length per minute2.6 m (8.5 ft)
Minimum pipe ID100 mm (4”)
Weight65 kg (144 lbs)
Product Code:UKS-0639-10-40-00-0


Additional Information:

  • Item Code: ABM-14
  • Production Capacity: 50
  • Delivery Time: GENERALLY EX STOCK
  • Packaging Details: PACKED IN WOODEN CASE
Get Best QuoteRequest A Callback
Plate Beveling Machine
  • Plate Beveling Machine
  • Plate Beveling Machine
  • Plate Beveling Machine

Plate Beveling Machine

Product Price: Rs 3.5 Lakh / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Capacity25mm
Model Name/NumberPromotech BM 25
Automation GradeSemi-Automatic
Weight12.5 Kg
Plate Thickness Range3mm onwards
Power2200W
Product TypeSteel Plate Beveling Machine
Product CodeBM_25
BM-25PLATE BEVELING MACHINE

The BM-25 is an easy to use, portable heavy-duty machine designed for beveling steel plates prior to welding.The beveller is equipped with powerful motor and fitted with face milling beveling head, allowing smooth operation and exceptional efficiency.BM-25 enables milling straight edges up to 25 mm bevel width, whereas variable spindle speed facilitates optimizing cutting conditions. Continuously adjustable milling depth and bevel angle between 0 and 90 require no tooling to change. BM-25 has got a state-of-the-art electronic motor overload module protecting the operator, the machine and the tooling.The beveller is equipped with guide rollers, which make it easy and light to operate.

Continuously adjustable bevel angle between 0 and 90 degrees:• One milling head for full range of angles• No need for separate milling heads for specific angles• Recommended bevel angle from 15 to 75 degrees

Additional Information:

  • Item Code: BM_25
  • Production Capacity: 50
  • Delivery Time: Ex stock
  • Packaging Details: Packed in Hard Plastic Box
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© ARC Welding Company. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.